2018-2023 Dodge Challenger 3.6L Supercharger Kit - Performance Upgrade for Street Racing & Track Days

2018 - 2023 Dodge Challenger 3.6 Supercharger Kit

• Please note: These systems require professional installation with mechanical knowledge and support.
• Tune included, Vehicles should be DYNO tested by a professional. 11-12psi of boost, gaining 175HP!!! 

 The 2018-2023 Dodge Challenger 3.6 V6 - RIPP Supercharger System. After all said and done, a projected 400 - 450 WHEEL horsepower right to the ground that can be driven daily.  Key features of this system are: a Vortech V3 Self-Contained Centrifugal Supercharger, an air-to-air front mounted intercooler, larger plug and play primary injectors and a proprietary plug-&-play map sensor.  Basemap calibrations are provided by RIPP via HP Tuners. Our system bolts on in eight - ten hours by a licensed mechanic and is considered the most complete and easy to install system on the market.

Preliminary tests show that an Automatic 3.6 Pentastar Dodge Charger/ Challenger produces only 255** rear wheel HP (WHP) in stock form. With a RIPP Supercharger installed we safely made 425WHP+ and 360ft/lbs** of Torque on a factory 3.6 Pentastar. That WHP is higher than a 5.7 V8 Engine swap costing thousands more and more in line with a 6.4 Hemi. Additionally, due to how efficient our supercharger system is, clients have reported an MPG increase from 1-4mpg combined City/hwy***. 

RIPP has spent an enormous amount of time tuning for better drive quality.  We've been testing in all conditions including high altitude, hot dry deserts and cold wet climates. No other manufacturer has spent more time developing engine calibrations than RIPP and it is a brand you can rely on World Wide. 

NOTICE: ALL 2015+ Dodge Chargers, Challengers & 300s will require an unlocked PCM from HP-Tuners.  (unlock service included with supercharger kit) once your order is placed you'll receive an e-mail with instructions.

Heritage Edition Option:

Looking for the traditional supercharger whine? Here it is. The Heritage Edition Vortech V-3 Supercharger makes the classic new again with its V-1 Straight Cut Gear Set. Get that classic supercharger sound you are looking for without compromising performance. Check out the video below to hear it in action!

System Includes:

• Vortech V3 Si Trim Supercharger (Self Contained)
• Vortech Mx flow Race Bypass Valve
• FIC upgraded Fuel injectors 
• MAP sensor
• Front Mounted Intercooler & hardware
• FMIC mounting system with cnc bumper spacer system 
• Aluminum mandrel bent charge piping 
• Engine Management; HP Tuners, link cable and tune
• HP-Tuner PCM unlock service
• CNC Supercharger Mounting Brackets + hardware
• Idler pulley assembly x2
• Gates Belt
• Coolant crossover assembly + RTV
• Air Filter + intake piping
• Cast air intake + t-bolt clamp
• Hardware
• 4 Ply Black Boost Couplers
• Vacuum lines, Vacuum T's and all adapters required
• Fully Illustrated Color Instructions
• 1 Year Warranty
• Tech line with Customer Service

   

  Each kit is assembled by hand here, in the USA. 

  

• Product update note: As of 9.2.23 This Supercharger kit will now include new and improved, state of the art, fuel injectors. This injector is called "SP"
• If you have an older supercharger kit purchased before 9.2.23 it will use the "H" injector. PLESE REFERENCE THIS DETAIL WITH ANY COMMUNICATION WITH RIPP. All Fuel injectors are manufactured by Fuel Injector Clinic (FIC)

 ** All RIPP WHP levels are measured at the rear wheel, not at the crank. Be careful when comparing HP to WHP. WHP levels vary depending on tire and gear combination as rotational mass comes into play, this affects both Naturally Aspirated (NA) and Forced Induction (FI) total output.

***Although the tune included with this system is calibrated for your vehicle the user is responsible for any further Dyno tuning to refine the calibration to their liking. The tune should be considered standard. The user should look forward to proper Dyno tuning if necessary. 

***RIPP is not responsible for tuning or discrepancies between different dyno readings. Many Dynamometers read in different net output depending on manufacture, style, elevation, and temperature. RIPP advertises SAE HP captured at the wheel instead of at the crank for the most realistic scenario as possible.  0-60 times and quarter mile times may vary based on driving style and other variable out of our control.